Friture Changelog¶

(full changelog can be found in the git repository)

HEAD New:

(generator) Add ramps at start/stop to avoid undesirable bursts.

Change:

(delay estimator) Increase the delay smoothing for more reliabilty

Bugfix:

(levels) remove the bogus factor of 2 on the rms. Now the rms of a sine is 3dB below its peak, as expected.

Version 0.6 - 2012/06/07 New:

(general) Track the number of Xruns. Display it in the about dialog, in the statistics tab.

(delay estimator) Cross-correlation is time averaged for robustness, better significance estimation, and phase info taken from the weighted cross-correlation too.

(delay estimator) Use generalized cross-correlation computation, with PHAT weighting. Now the estimation is much more robust in a reverberating environment.

Change:

(general) Increase sample rate to 48000 Hz. This simplifies and improves the quality of the filters in the octave spectrum.

(octave spectrum) Fix midband frequencies, so that they match the ISO bands of an equalizer

Version 0.5 - 2012/05/26 New:

(delay estimator) The maximum reliably-estimated delay is now configurable. Just in case somebody needs more than one second

(delay estimator) Replace the peak detection by cross-correlation The cross-correlation is computed on (largely) subsampled data. It not only provides the delay, but also the in-phase information, and a measure of the correlation quality (value of the normalized correlation coefficient).

Display the level labels with a 250 ms period. This reduces the work that needs to be done (drawing text is costly), and makes the values much more readable.

Version 0.4 - 2012/05/18 New:

First embryo of documentation

Add PyPI requirements.txt file, so that friture dependencies be installed by ‘pip’

New text file for user-readable changelog

Change:

(delay_estimator) Optimization

Bugfix:

(generator) Test for zero mean before using it as a denominator

(Pink noise generator) Fix the parameter k k, the number of white channels to sum, was dynamic, and this was causing changes of colors in the produced noise, changes that could be heard.

(Generator) Fix exception in pink noise generator. Now returns empty array when asked for n=0 samples

(Generator) prevent overflows at -1. Premultiplying by 0.99.

(Generator) time array was not incremented properly.

Version 0.3 - 2012/04/29

(delay estimator) also display the delay in meters

(py2exe) Exclude more dll from the package

Increment version

Add version and release date in the about page.

Properly delete widgets when closed or changed.

(py2exe) do not exclude subprocess; subprocess is now required by psutils

(py2exe) do not ignore difflib; difflib is now required for numpy

Do not redraw the delay label if the text has not changed.

Disable the linear screen interpolation in timeplot. This was bogus signal-wise, and practically prevented from displaying some data correctly.

Introduce a variable for the time window in the scope.

Remove the minus peak in the burst generator.

Remove the bogus time inversion in the scope.

Fix message for delay estimator in single channel.

Fix detection of peaks in the delay estimator.

Add a new widget to measure delays. Detect peaks in two channels and measure the time difference between the two.

Enlarge the trigger window (and remove leftover debug statement)

Change scope to trigger on center of window, improve triggering.

Fix buffer growth in ringbuffer.py

Allow negative times in the scope horizontal axis

Fix indentation

Immprove the burst generator

Make the computation cleaner, and double its amplitude.

Move the norm computation (after fft) to own function so that it appears on the profile directly

Move the sweep generator in a separate class

Pass 0 to cpu_percent to make it non-blocking

Fix indentation

Add more comments about instructions for PyPI

Add some usage comments to setup.py, and add a little text to the description

Version 0.2 (Windows 2011/10/31 - all platforms PyPI 2012/01/04)

Add Numpy include to Cython extension building
Fix audiobackend reference for the generator when launched in the central widget
Increase pink noise fidelity
Cleanup generator import (avoid scipy import)
Fix py2exe inclusion of OpenGL packages
Fix integer comparison in pink noise code
Plug the generator dock into the dock widgets
Generator dock
Add output devices listing in audiobackend class
Update properly the histogram spectrum coordinate transform when the scale changes
Avoid calling the filters with empty input arrays
Fix use of the decimate function in the no-initial-conditions case
Define a separate decimate function
Enable the filter initial conditions propagation for correct filtering
Ring buffer size can grow (fix issues with long delays)
Fix qwt/opengl/numpy widget for arrays proper initialization (actually fix multiple simultaneous FFT widgets)
Add a spectrum GUI setting for single/dual channels
Introduce a delay setting that acts one the spectrum (for now)
Save and restore the input device/channel/single//duo configuration
Simplify baseline computation (and remove substraction warning
Make the about dialog a child of the mainwindow so that it is closed automatically when the mainwindow is closed.
Some preliminary code for baseline setting
Some preliminary code for nicer shading
Fix qwt/opengl/numpy plot for linear scale
Add legend to the scope when two channels are used
Two channels mode for the level meter
Two channels for the scope
Make the spectrum draw the power difference when two channels are used
New feature : two-channel difference as input
Fix background gradient in spectrum
Enable the qwt/opengl/numpy spectrum plot instead of the original curved one
Add cumulative time profiling stats
Put the individual icon files in the repository

Windows Version 2012/05/26

Qt plugin for svg icons (qsvg4.dll) now depends on QtXml, thatpy2exe failed to include automatically

Windows version 2012/05/17

Fix histplot transforms initializations (removes errors on startup) and make transformation more performant
Use array operations for the canvas transformation
Fix add-dock toolbar icon, which was badly rendered on windows
Fix dock settings icon, which was badly rendered on windows
Convert to MUI2, fix encoding, improve uninstaller
Nice microphone photo for the splash screen - license is cc-by-2.0
Remove non-updated statistics
The current working directory no longer needs to be set at the end of install
generated_filters.pkl is no longer to be installed
Store the filter params in a true python file, simplifies the import
Fix vu-meters that decrease indefinitely

Version 0.1 on PyPI - 2011/02/02

Fixes for non-py2exe setup
Improve setup.py for distribution, with classifiers, startup script and manifest
Allow friture.py to be executed as a child of another script, such as lsprofcalltree
Fix off-by-one pixel for the level meter
Remove bogus styling of the level meters
Let python manage the spectrogram painter object lifetime
Ordering for object creation fixed
Move friture.py to subdir
Move scripts to subdir, remove lsprofcalltree from friture.py
Move Cython extension to subsubdir
Move source files to subdir

Windows version 2011/01/29

Fix uninstaller, improve installer info
Use packaging date for the installer version
Fix for the installer move
Move some source files to subdir
Move .ui files to subdir
Move ui*.py and resource py file to friture subdir
Move the installer and Microsoft redist pack to a subdirectory
Update install instructions
Move test files to sandbox subdir
Move image files and resource file to a subdirectory
Move installation details to a separate file
Move profiling info to separate file
New colors for FFT spectrum, less agressive
New style for octave spectrum’s peaks
Add ‘central dock’ label to clarify what is the central widget

Windows version 2011/01/09

Stop py2exe from complaining about msvcp90.dll

Add manual bounds ckecking in exponential smoother

Add code to include numpy headers when building the cython extension on Windows

Major cleanup and optimisation in the histogram plot

Better peak meter, remove integer conversions

Add exponential smoothing (0.125 s) to the RMS level widget

Cleanup and optimization in octavespectrum update

Fix bug : could not add any dock when all of them were removed

Major performance improvements in histplot by caching and avoiding QwtInterval

Specific import from PyQt4.QtGui to improve startup time

Add Cython machinery to setup.py

Make the exponential smoothing smarter, and implement it as a cython module (dramatic speed improvement)

Windows version 2010/11/08

(NSIS installer) Fix Working Directory when starting Friture at the end of the installation

Windows version 2010/11/04

Optionally remove settings when uninstalling (NSIS)

Improve dock deletion, and dock index selection

Use a real exponential moving average at the output of the octave filters

Fix settings initialization for the 2D spectrogram, fft and octave spectrum (Note: could be done slightly smarter)

Windows version 2010/10/25

Clean and fix errors about bar widths in the octave spectrum

Fix minimumSizeHint computation for octave, time and spectrum plots from a missing replot() at init end

Add tooltips to the control bar

Update splash screen with logo

Tweak FFT spectrum default settings

Tweak defautl settings for the octave spectrum

Fix default settings for the 2D spectrogram (log frequency scale)

Remove levels and scope widgets from the default set of widgets shown on the first launch

Improve the profiler info

Add an option to set the reponse time in the octave spectrum.

Windows version 2010/09/29

Check if the bar pixmap needs to be updated only once per timer update.

Use an opaque color for the FFT spectrum plot brushes, disables the stroke, and draw the grid on top.

More generic NSIS script, more robust ot my own mistakes !

Even more precise import for lighter py2exe distribution

Tweak About message, add email address, remove name.

Fill the peak curve in the FFT spectrum

Import from scipy.signal.sigtools and scipy.signal.filter_design instead of scipy.signal

Import lfilter from scipy.signal.sigtools instead of scipy.signal

Hyperlink for the homepage address in the about widget

Windows version 2010/07/14

Exclude unused modules from py2exe

Include the filters file in nsis distribution

Separate filter design and use in two different source files.

Import more selectively. Hopefully helps py2exe

Include the filters coeff file in py2exe packaging

Add X-grid to the octave spectrum

Tweak widget names

Display a colorbar next to the spectrogram plot

Fill under the spectrum curve, makes it a little more readable

Recreate ring buffers when necessary only

Do not call len() multiple times

Avoid checking for proper ringbuffer at each timer tick.

Use pre-generated filters coeff instead of recomputing them at each change.

Disable filter conditions propagation for now.

Introduce peaks in the octave spectrum.

Tweaks to the decimating filters analysis.

Go for order-3 decimating filter

Go for 50 dB stopbands

Better analysis of the filter bank frequency response

Go for a non-decimating filter bank since the frequency output of the decimating one in close to catastrophic...

Introduce zi/zf to the filtering without decimation

Code for visual analysis of the filters frequency response

Use log10 scale engine while the log2 engine still has references issues.

Switch to 80dB stopband filters to make the octave analyzer nicer with single frequency excitation.

Simplify histogram draw by removing the horizontal bar feature.

Fix canvas height caching

Implement ring buffer for filtering - seems like there’s an issue with the filters stability

Move the ring buffer class to its own file for reuse

Move octave filtering to a class

Add audiobuffer method to get the new points only

Fixed and improvements to the histplot pixmap cache

Cache bar in a pixmap.

Spacebar is a shortcut for start/stop

Move from 7 octave to 8 octave

Windows version 2010/06/29

Allow 1/3, 1/6, 1/12 and 1/24 octave filters, with proper weightings.
Implement IIR+decimation instead of IIR only. Will be especially useful for more-than-one bands per octave.
Make bands number automatically computed from the bands per octave choice.
Add Hann window to the fft code for better frequency resolution.
Implement an octave-band filter widget.
Finish and cleanup implementation of an octave (or fraction of octave) filter bank
Move scope trigger to the left edge
Move the log to a dedicated tab in the about dialog
Make the statistics widget part of the about window instead of a dock widget.
Start/Stop for the spectrogram timer.
Spectrum scale defaults to log10.
Spectrogram default to log10 scale.
Move About code to source file instead of ui file, and prepare for tabing.
Fix start/stop button text.
Fix the start/stop icon state.
Fix minimum size of the level widget.
Display the weighting state in the spectrum y-axis title.

Windows version 2010/06/16

Add human middle-ear weightings A, B and C to the spectrum and spectrogram settings.

Put common code for the docks control bar in a separate file.

Allow to select the channel for any device stream with more than one channel.

Bugfix : actionStart belongs to self.ui

Reorder icons in the toolbar

Pass the logger to widget classes

Monitor the global CPU usage in the statistics widget. This may deserve its own widget, with something like QProgressBar. The feature is based on psutil, which becomes a new dependency for friture !

Set size policies of scope, spectrum, spectrogram so they can be shrinked

Move ui code from Ui_xyz.py to xyz.py directly

Windows version 2010/06/06

Fix to the vcredist section in the installer script.

Lighter gradients in the widgets.

Tell the user that the levels and scope widgets have no settings yet.

Put the VC++2008 redistribuable libs in the tree.

Install VC redistribuable libraries.

Windows version 2010/06/04

Draw a white background on the plots mouse trackers.

New log icon with an exclamation mark

New icon to add a new dock

Use About Friture instead of just About for the About button

Use the friture icon for the About button

Comment out the toolbar styling for now, not that beautiful

At first launch, do not display the log and stat docks.

At first start the central widget is a spectrogram.

Default set of docks at first start.

Use smaller fonts for the plot axis titles.

Remove the docks separator styling, not very nice.

Update the installer file list.

Automatically distribute the Qt svg plugin.

Exclude powrprof.dll in py2exe distribution.

Put the settings icon on the left.

Do not fail when ctypes cannot find the dll

Comment out the stylesheets for now, and use stock dock widgets instead of using a custom titlebar

Set the separator style to black 1 pixel.

Apply some styling to the toolbars so that they look more custom.

Slightly change the plots background gradients to nicely merge with the grid.

Set central layout margins to zero.

Pass the logger to the spectrum, scope, levels widgets. Do the same for all widgets in the central widget too.

Add a dummy scope and levels settings dialog.

Fix spectrogram initial settings.

Implement the spectrum y range settings.

Fix spectrum initial settings.

Remove previous static scope, spectrum and spectrogram widgets

Save and restore central widget state

Remove the settings buttons from the spectrum and spectrogram widgets

Now the central widget is very close to the dock widget in feature/aspect

Move spectrum stylesheet from mainwindow ui file to spectrum code file.

Move scope stylesheet from the global ui file to the scope file

Add a settings icon to the dock.

Add an icon to the “dock” button.

Dock icon based on svg objects, no contour or path.

Custom icon for dock/undock.

Use an icon for the dock close button.

Add (modified) about svg.

Restore state before restoring geometry.

Save and restore the window geometry.

Save and restore dock states.

Add the possibility to choose the dock widget type on creation.

Save and restore docks existence and positions.

Assign a fixed height to the dock control widgets.

Add a dock button to the floating dock.

Stylesheet the dock control widgets.

Add another special control widget to a floating dock.

Add a custom toolbar as the dockwidget titlebar.

Enable the spectrogram timer in a dock

Enable the code to select a widget in a dock.

Put the Dock code in a separate file

Connect the new dock widget to the timer, pass it the audiobuffer.

Directly connect the widgets to the display timer.

Pass the audiobuffer in separate functions instead of passing it when asking for the widget update.

Connect the statistics update function directly to the timer tick

Move the buffer update to a specific function, directly connnected to the timer tick

Actually add a dock and a widget (needs to be connected to the timer tick still)

Move settings for spectrogram and spectrum to separate classes and window

Move audio backend code to a separate file

Move audio initialization to a separate method

Use isVisible() functions instead of visibilityChanged signals.

Refactor the frequency range code

Move the spectrogram code and ui in separate files

Move spectrum to separate code and ui files

Use numpy fancy indexing to compute the peak falloff

Move scope widget to separate .py and .ui files

Fix for levels statistics

Move the level widget code in a separate source file, and in a separate ui file.

Make the log text selectable

Scroll the log widget so that the last log line is visible

Set the log and statistics widget backgrounds as white

Add a line number to the log messages

Remove log base 2 frequency scale

Move audio ring code to a separate file.

Source file encoding fix

Factorize the stream opening function.

Comment functions as slots or methods. Will help me to separate methods to their own appropriate module if applicable.

New Logger class, built to handle log messages from all the program classes.

Put “Settings” dialog code in a separate file.

Put the “About” dialog code in a separate file.

New titlebar widget mockup. Plan: one dockwidget = one visualiation placeholder.

Windows version 2010/03/20

Remove dash from Windows installer filename.

Automatically use the date as the Windows installer name.

Add the icons to the source versioning, and fix setup.py

Add icon to the Windows exe.

Workaround to properly display the icon in Windows 7 taskbar.

Windows version 2010/03/17

Special case for stderr on Windows, logging to a file.

Add custom icon for the About icon in the toolbar

Add an icon in the About dialog

Add an about dialog.

Update window icon

Move some messages to the new logging window.

Add logging window

Cleanup stylesheet

Display text labels in the toolbar, in a white font.

Use solid lines for plot grids

Disable latency logging by commenting out (forgot to disable the file creation, caused permission problems on Windows).

Update NSIS script with proper license text, and installer name that include the version number.

Update levels icons with gradient and white offset.

Windows version 2010/03/16

Update statistics icon.

Add a grid to the spectrum

Add a grid the scope

Disable latency logging facility for now.

Add small radius to the border corners of levels, scope and spectrum.

Add stylesheets for scope, spectrum and levels to make them a little fancier, and learn how to use CSS.

Windows version 2010/03/15 (executable & installer not publicly released)

NSIS script to generate a install exe from a py2exe distribution.

Special case for IOError on stream read. To be more specialized to the input overflow case.

Add frame corders to all qdockwidgets, so that they are more easily moved.

Add a “cool modern” linear gradient as a toolbar background.

Put the statistics in a QScrollArea to gain some space.

Change settings dialog title and icon.

Update window icon.

Add icon to the settings menu

Update start/stop icons

Windows version 2010/03/12 (no installer, executable not publicly released)

Add some excludes to setup.py:py2exe

Comment out cochlear code since it is unused for now, and causes py2exe to include a lot of scipy, if not all.

First ever Windows executable (not publicly released) 2010/03/11

Workaround a bug in scipy imports that appears when using py2exe.

Add code for cochlear processing. Not enabled yet, may not be the best idea after all.

Add a file with an implementation of the gammatone filter bank in numpy (currently only half-converted from Matlab)

Add code for logarithmic scope, not enabled yet. A better solution could be to dynamically adjust the scale, using the same kind of algorithm as for the peak computations.

Finally fix off by one color computation.

Ask Qt not to update the canvas background on each paint event.

Use astype instead of digitize, which is mush slower because it can do so much more. Nest step could be to use a function instead of a precomputed palette.

2009/11

Small simplificaton in UI layout code

Use numpy clip function

Add profiling instructions at the top of friture.py

Add a script to convert the pstats output to a graphviz dot file, which can in turn be converted to a png

Replace a boolean mask with a simple substraction

Cache the decimation computation to avoid a log2.

Replace uses of .max() with [-1] where possible.

Do the dB conversion once instead of twice for level widgets

Remove a useless sqrt since we do a log10 just after.

Cache the canvas object for all plots, since it appears to be a slow call in qwt.

Add a window icon, currently very basic

Simplify peak computation

Introduce one more cached array for peak computation

Decimate as much as possible before doing the fft

Remove log10 usage from peaks computation in the spectrum

Just import what is needed in audioproc.py

Cache the frequency scale in audioproc

Move the spectrum processing to its function.

Move scope processing ot its function.

Move level processing to its function

Remove the use of the status bar to gain screen spece. Use the plot picker instead.

Move the frequency scale definition to the processing function. This is in preparation to the use of decimation to decrease computing time for fft of small upper range.

Compute the peaks directly on the interpolated spectrum. Fewer peaks to compute when the fft size is larger than the number of pixels in the plot, which is a common case.

Move the computing of peaks to a specific function. That way it appears independently in the profile.

Use command-lien arguments to select the profiling tool. Default to no profiling.

Bug fix : stream is in int16 format, not int32 ! This fixes the frequency scale factor of 2 that was observed.

Use SAMPLING_RATE instead of hardcoded number.

Use rfft since the input is real.

Cleanup spectrum code.

Add basic trigger capability to the scope widget

Move the default position for the statistics widget to the left.

Replace the settings button with an action in the toolbar.

Move settings to a separate dialog. Greatly cleans up the interface !

2009/10

Disable antialiasing fro scope and spectrum. Dramatically improves the performance !

Intelligently (i.e. with interpolation) limit the number of points to be drawn on the plot to the canvas width (in pixel units). Avoids the spectrum painting time to skyrocket for high fft sizes

Add statistics field about spectrogram timer period

Change statistics description to be more meaningfull

Add timing statistics about computation and display

Add file for log2 scale engine

Disable plots decimation since it raises issues with the spectrum plot and its peaks

Add time information for each timer events

Factorization of log10

SYnc to qsynthmeter.cpp rev 306, adds gradient look

Simplify fft size save/restore

Fix frequency scale saving

Fix the frequencies labels formatting

Fix the frequency label formatting

Save/restore color ranges

Save/restore time range.

Save/restore frequencies minimum and maximum

Save/restore the frequency scale

Save and restore the fft size when closing/starting Friture.

Move state save/restore to specific functions

Add base 2 logarithmic frequency scale for the spectrogram. Warning: the frequency scales drawn on the side of the graph are wrong ! I am waiting for a bug fix in PyQwt before implementing them.

Change the frequency range for the spectrogram too.

Add two spinBoxes for frequency range selection. Only works for the spectrum for now.

Uncheck actionStart when changing input device

Major timer redesign. Now we have two timers: one for 1D and 2D widgets (levels, scope, spectrum, statistics), and one for 3D widgets (spectrogram). Using an audio buffer avoids latency issues. This audio buffer behaves like the spectrogram pixmap. It is a circular buffer, with data written twice.

Add statistics about FFT period.

Log to a file the time delay between spectrogram updates. Add a script to analyze it, called hist.py

Add new file “hellogl.py” to experiment with opengl drawing.

Save and restore dock and toolbar states on exit and restart, respectively.

Allow to modify the time range of the spectrogram.

Fix the logic of lost chunks in the timer slot.

Make the time range a parameter in the CanvasScaledSpectrogram class.

Add a flag to indicate that we are processing the last chunk of the timer fire, so that if we are not we do not bother updating the screen.

Replace while loop with a for loop, allows to know where we are in the process.

Store the number of available chunks in a variable instead of calling the interface multiple times.

Add a statistics entry about mean number of chunks by timer fire, in the last 1000 timer fires.

Add a latency measurement to the statistics.

Add icon for the statistics button in the toolbar. Now we have icons for all buttons.

2009/09

Add profiling option with console output instead of a file for kcachegrind.

Add an icon for the spectrum action.

Do not update the spectrum when the widget is not visible.

Do not compute and update the levels when the widget is not visible.

Do not try to display the statistics when the widget is not visible.

Do not update the scope widget when it is not visible.

Add svg icons for levels and scope widget.

Add an icon for the Stop button.

New resource svg for the Start button. Also rename the resource file to resource_rc.py since it’s what Qt Designer asks for.

Use QDockWidget::toggleViewAction instead of our own actions with signals and slots.

Fix FFT size in UI

Add a __del__ method for explicit deletion of the spectrogram painter and its pixmap. Avoids a segfault.

Add a setup.py file with basic commands for py2exe. Allows building an exe for Windows.

Add resource.py to the versioned-controled files.

More fine tuning to the level widget layout. Move it to the left.

Fix Level widget layout.

Fix minimum size for the qsynthmeter widget.

Small adjustment to level widget layout. Needs more work.

Remove frame around spectrogram. Fix statusbar.

Add tollbar buttons to toggle the display of individual widgets.

Move the Start/Stop button to a new toolbar. Move the scope, spectrum, level and statistics widgets to dock widgets.

Dynamically choose the maximum number of chunks to read by timer tick based on the latency reported by portaudio.

Handle up to three chunks in a row instead of discarding the additional ones.

Be a little more verbose for statistics, to be clearer.

2009/08

Add a link to the wiki in README

Rework the layout of the level meter a little bit.

Add peaks to the spectrum widget

Derive qsynthMeter from QFrame and give it a raised look

Int conversion cleanup

Use default for size hints of levels.

Change the way audio levels are displayed : put them closer to the level widget.

Remove the display of the max of the current audio data.

Fix the time axis on the spectrogram widget. Now set to 10 seconds for every choice of the FFT window length.

2009/07

Add a spacer in the first horizontal layout to give a more natural size to the buttons.

Use only integers in frequency scales.

Move buttons at the top of the layout for better alignment of the widgets.

Use custom labels using ‘k’ for thousands in frequency scales widgets.

Switch from seconds to milliseconds in the signal widget.

Add pointer info in the status bar when clicking in the signal or spectrum widgets.

Add pointer info in the status bar when clicking on the rolling spectrogram widget.

2009/06

Add statistics about useless timer events

Bugfix : forgot to reset the needfullreplot switch

Display info about lost chunks of data

Fix logarithmic scale in the spectrum plot

Fix use of timer and Start button when changing device

Factor device test code

Print an error message when selecting a non-working input device

Non-fatal error on device change

Iterate over available devices for a working one On startup, first try the default system device, and then the other

Bugfix for delays If the program is too slow to process all the chunks, discard those in excess. In fact, it is not that it is too slow, it is probably that there is a small mismatch between the timer period and the audio buffer period.

Major timer-based refactor All sub-processes have been removed and replaced with a timer in the main process. This timer fires every 20 ms or so and retrieves audio data. This removes a lot of complexity coming from synchronization issues. Additionnally a level-meter widget is introduced, and the plot widgets have been optimized so that only the needed part is redrawn (namely axes are not redrawn).

2009/01

Add a copy of the GPLv3.

Update License statements to GPL version 3.

Add proper encoding statements, and License statements.

Add details in TODO.

Add items and details in TODO.

Add a TODO file.

“Simplify” locking.

Move profiling code to be all conditional.

commit 812b5b8050a921267c4844457d70d7a2a853c6e5 Author: Timothée Lecomte <timothee.lecomte@lpa.ens.fr> Date: Fri Jan 9 21:47:07 2009 +0100

first commit